Clear Bridge - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clear bridge

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
clear bridge { bridgeGroupName | vplsName }
Command introduced before JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Removes all dynamic (learned) MAC address entries from the forwarding table for the
specified bridge group or VPLS instance . There is no no version.
bridgeGroupName—Name of a bridge group specified with the bridge command
vplsName—Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
Privileged Exec
Clearing Dynamic MAC Addresses from the VPLS Forwarding Table in the JunosE BGP
and MPLS Configuration Guide
Chapter 4: C Commands
367