Show User - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show user

show user
Displays information about all users or a particular user configured in the local user database on the
switch.
show user [username]
Syntax Definitions
username
Defaults
By default, all users are displayed if the username parameter is not specified with this command.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use this command to display information about read/write access and partitioned management access
(domains and families).
Examples
-> show user
User name = Customer1,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
Read Only for domains
Read/Write for domains
Read/Write for families = ip rip ospf bgp vrrp ip-routing ipx ipmr ipms ,
Snmp allowed
Snmp authentication
Snmp encryption
User name = admin,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
Read Only for domains
Read/Write for domains
Snmp allowed
page 28-48
The name of the user. Used for logging into the switch.
= 10/27/2010 11:01 (30 days from now),
= Yes (Automatically unlocked after 19 minute(s)from now),
= 3,
= None,
= Admin System Physical Layer2 Services policy Security ,
= YES,
= SHA,
= DES
= 10/27/2010 11:01 (30 days from now),
= None,
= 0,
= None,
= All ,
= NO
= 9/30/2010 10:59 (3 days from now),
= 9/30/2010 10:59 (3 days from now),
OmniSwitch CLI Reference Guide
AAA Commands
March 2011