Show User - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

AAA Commands

show user

Displays information about all users or a particular user configured in the local user database on the
switch.
show user [username]
Syntax Definitions
username
Defaults
By default, all users are displayed if the username parameter is not specified with this command.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use this command to display information about read/write access and partitioned management access
(domains and families) or end-user profiles associated with users.
Examples
-> show user
User name = Customer1,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
Read Only for domains
Read/Write for domains
Read/Write for families = ip rip ip-routing ipmr ipms ,
Snmp allowed
Snmp authentication
Snmp encryption
User name = admin,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
Read Only for domains
Read/Write for domains
Snmp allowed
User name = j_smith,
Password expiration
Password allow to be modified date
Account lockout
Password bad attempts
END user profile
Snmp allowed
Snmp authentication
Snmp encryption
OmniSwitch 6250 CLI Reference Guide
The name of the user. Used for logging into the switch.
= 10/27/2007 11:01 (30 days from now),
= Yes (Automatically unlocked after 19 minute(s)from now),
= 3,
= None,
= Admin System Physical Layer2 Services policy Security ,
= YES,
= SHA,
= DES
= 10/27/2007 11:01 (30 days from now),
= None,
= 0,
= None,
= All ,
= NO
= 10/27/2007 11:01 (30 days from now),
= Yes (Automatically unlocked after 19 minute(s)from now),
= 3,
= u_profile1,
= YES,
= SHA,
= DES
November 2009
= 9/30/2007 10:59 (3 days from now),
= 9/30/2007 10:59 (3 days from now),
= 9/30/2007 10:59 (3 days from now),
page 43-67