Dormantuser (User Inactive); Ethcsf (Ethernet Client Signal Failure) - Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual

1830 pss series photonic service switch
Table of Contents

Advertisement

Trouble-clearing procedures
DORMANTUSER
....................................................................................................................................................................................................................................
DORMANTUSER

DORMANTUSER (User inactive)

The DORMANTUSER condition is a user login inactivity timeout (maximum interval
that the user is inactive, without logging into the NE, before the userID is disabled).
...................................................................................................................................................................................................
This user may be deleted from the NE by using one of the following commands:
1
CLI
WEBUI
E
N D
O F
...................................................................................................................................................................................................
ETHCSF

ETHCSF (Ethernet Client Signal Failure)

The OT port has detected the ETHCSF condition at the MEP layer. A MEP detects the
ETHCSF condition when it receives a CCM frame with a interface status TLV of
"Down."
Severity
Service affecting?
Applicability
The alarm is cleared when the MEP receives a CCM frame with interface status TLV of
"Up."
Corrective Action
...................................................................................................................................................................................................
Check the remote peer Ethernet client status. The remote peer client port LOS/LSS
1
triggers the local ETHCSF.
CLI
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
config admin users delete
Select
Administration
S T E P S
Major
No
11DPE12E
alarm
>
Security
>
Users
, select the user, and click
DORMANTUSER (User inactive)
Delete
2-71
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1830 pss-321830 pss-361830 pss-4

Table of Contents