Table of Contents
Advertisement
User Interface
Business OfficeXchange Features
Feature Codes
Introduction
Cancel call waiting
Call pickup
Direct call pickup
Feature codes are sets of numbers that are entered at the telephone keypad in
order to implement or cancel certain BOX features. To enter the feature codes, lift
the telephone receiver and dial the feature code followed by the extension
number, if appropriate. The following table provides dialing instructions when
entering feature codes. If a feature code has been programmed with a code that is
different from the one in the table, make note of it in the table.
)HDWXUH
Cancel Call Waiting
Call Pickup
Direct Call Pickup
Call Forward Variable
Cancel Call Forward Variable
Pager
Digital Direct Access
Analog Direct Access
Cancel Busy Redial
This feature code disables call waiting for the next call. A second dial tone is
provided after dialing the feature code. Canceling call waiting allows for modem
data transfer without the interference of the call waiting tone.
Dialing the call pickup feature code causes a ringing line in the user's pickup
group to be answered. Each line may be assigned to a call pickup group.
This feature allows call pickup outside the answerer's pickup group. To activate
this feature, dial the directed call pickup feature code followed by the extension
number.
$GGLWLRQDO 'LDOLQJ
)HDWXUH &RGH
5HTXLUHG"
*70
No
*1
No
*5
Extension number
*72
Extension number
*73
No
*3
No
*40
Trunk number
*41
Trunk or line number
*42
No
363-208-050
(Continued on next page)
Issue 4
June 2002
D-7
Advertisement
Chapters
Table of Contents
