Nebs Cover Installation (Optional) - Lucent Technologies SLC ConnectReach User & Service Manual

Installation
®
Mount the SLC ConnectReach

NEBS Cover Installation (Optional)

Introduction
Procedure
5-32 Issue 4 June 2002
™
System
The new equipment building standards (NEBS) installation kit (ED-7C830-30, G5)
consists of a cover for the SLC ConnectReach system and four #6-32 mounting
screws with lock washers. The NEBS cover allows the SLC ConnectReach
system to meet Bellcore NEBS Level 3 standards (GR-63).
The NEBS cover is placed on top of the SLC ConnectReach system unit and
secured on each side with two screws and lock washers as shown in the following
figure.
363-208-050