Lucent Technologies SLC ConnectReach User & Service Manual page 41

System Overview
® ™
SLC ConnectReach
Overview (Continued)
Features
(continued)
* Trademark of VINA Technologies, Inc.
System Description
Business office exchange
3
capability provides features similar to a Centrex service offered by a CO
switch but without the need for dedicated lines to the CO for each
extension. The BOX feature cannot be used in conjunction with the
ClearReach feature.
Service on any of the DS0 channels can be changed by the use of
3
provisioning commands.
A dynamic host configuration protocol (DHCP) server to dynamically
3
assign Internet protocol (IP) addresses to personal computers (PCs) on the
local Ethernet. This relieves system/network administrators from the
requirement to assign a fixed IP address to each PC.
A simple network management protocol (SNMP) server to allow remote
3
monitoring, management, and event notification with standard SNMP client
software.
Routing of IP traffic.
3
Multiple firewall technologies that protect local area network (LAN) users
3
against unauthorized connections from the wide area network (WAN):
network address translation (NAT), port address translation (PAT), and
internet protocol (IP) filtering. The IP filtering also prevents devices that are
not on a specified network from accessing the SLC ConnectReach system
(for example, the carrier's network operations center).
Local call routing
3
incoming trunk calls to available telephone lines, routing an outgoing call to
an available DS0 time slot, and alternate routing to the CO in case of a T1
failure. The LCR feature cannot be used in conjunction with the
ClearReach feature.
Built-in data router eliminates the need for a separate external router.
3
*
*
(BOX ) private branch exchange (PBX)-like
* *
(LCR ) feature: Provides features such as routing
363-208-050
(Continued on next page)
Issue 4 June 2002 1-11