Lucent Technologies SLC ConnectReach User & Service Manual page 490

User Interface
Business OfficeXchange Features
Feature Codes (Continued)
Call forward
Cancel call forward
Pager
Digital direct access
Analog direct access
D-8 Issue 4 June 2002
This feature forwards calls from one extension to another extension or trunk. An
incoming call may be forwarded as many as ten times. To activate call forwarding:
Step Procedure
1 The user dials the call forward feature code followed by the number of
the forwarding location.
2 The software places a call to the forwarding location. If the line is
answered, forwarding is enabled.
If the line is not answered, the user must place a second call to the same
number within 60 seconds. The user will hear a confirmation tone (same
as call waiting).
Each time the forwarded line is called, there will be a short ring to remind
you that you have call forwarding activated. If your phone system is
equipped with a voice mail system, the call forward variable may be used
to immediately forward all calls to voice mail. Obtain a voice mail
extension from your administrator and enter it as the forwarding location.
Stop! End of Procedure.
To cancel call forwarding, the user dials the cancel call forward feature code and a
confirmation tone is sounded.
The pager feature allows for paging capability by dialing the pager feature code.
This feature is used for diagnostics and is not included in the quick reference
guide. If direct trunk select is enabled, the user may enter the feature code
followed by the trunk number to test a specific trunk.
This feature is similar to digital direct access. It is not included in the quick
reference guide. The user enters the feature code followed by the analog line
number to test a line or analog trunk.
363-208-050
(Continued on next page)