Lucent Technologies SLC ConnectReach User & Service Manual page 243

®
Configuring the SLC ConnectReach
Using the Configuration Commands
Configuring FTP Log Dump (Continued)
Procedure
(continued)
™
System
Step Procedure
Make the necessary configuration changes. The following table describes
2
these commands
Enter this
command...
enable
host
filename
directory
ftp-user-
password
business-name
zip-code
phone-number
Help
Stop! End of Procedure.
.
...and specify this
value
[off], on
IP address
target file name
target directory
user name
password
business-name
zip-code
phone-number
Comments
Enables or disables the FTP log
dump.
Specify the ftp user name and
press enter. You will be prompted
to enter a password. The
password is not displayed on the
screen.
Enter the company's name
of the SLC ConnectReach
System's location.
Enter the zip code of the SLC
ConnectReach System's location.
Enter the phone number of the
SLC ConnectReach System's
location.
Access online assistance.
Issue 4 June 2002
363-208-050
4-157