Lucent Technologies SLC ConnectReach User & Service Manual page 264

Installation
Interface Card Installation
Voice Interface Card Installation
(Continued)
Procedure
(continued)
5-12 Issue 4 June 2002
Step Procedure
4 Identify the location of the interface card to be installed using the following
figure showing the top view of the motherboard.
5 Remove the interface card and the package of four plastic standoff pins
from the packing carton.
6 If the motherboard is not equipped with the four plastic standoff pins
needed to lock each corner of the interface board, insert the pins from the
packing carton.
7 Align the connectors on the bottom of the interface card with the
connector pins on the motherboard and gently press on the top of the
interface card until the card locks in place.
8 After all interface cards have been installed, slide the bottom tray/front
panel assembly back into the cover.
9 Install the screw in the front panel.
10 STOP. YOU HAVE COMPLETED THIS PROCEDURE.
363-208-050