Lucent Technologies SLC ConnectReach User & Service Manual page 328

®
Provisioning the SLC -2000 RT/HDT
Provision Channel Unit(s) at SLC
System
Using the CIT to Provision Channel
Unit(s) (Continued)
Channel unit
provisioning
parameters
(continued)
6-20
Issue 4 June 2002
®
ConnectReach
4. To add four 64-kb/s DS0 channels, provision circuit 1 of the SPQ452 with
the following parameter values:
Provisioning Parameter
rate=Subscriber data rate
ec=Error correction
zc=All-zero-code allowed
scc=Secondary channel used SCC
qm=Quality monitoring
rls=Redlined
*
ZC and SCC are automatically set to YES when RATE = 64.
Then, provision circuit 3 of the SPQ452 with the following parameter
values:
Provisioning Parameter
rate=Subscriber data rate
ec=Error correction
zc=All-zero-code allowed
scc=Secondary channel used SCC
qm=Quality monitoring
rls=Redlined
*
ZC and SCC are automatically set to YES when RATE = 64.
™
WORD
Abbreviation Value
RATE 64 kb/s
EC SCEC
ZC YES
YES
QM NO (default)
RLS NO or YES (customer's choice)
WORD
Abbreviation Value
RATE 64 kb/s
EC SCEC
ZC YES
YES
QM NO (default)
RLS NO or YES (customer's choice)
*
*
*
*
(Continued on next page)
363-208-050