Lucent Technologies SLC ConnectReach User & Service Manual page 233

®
Configuring the SLC ConnectReach
Using the Configuration Commands
Configuring SYSLOG (Continued)
Facilities and
severities
(continued)
™
System
SYSLOG Message Facilities Codes
Code Facility (name association)
0 Kernel messages
1 User-level messages
2 Mail system messages
3 System daemons messages
4 Security/authorization messages
5 Messages generated internally by syslog
6 Line printer subsystem messages
7 Network news subsystem messages
8 UUCP subsystem messages
9 Clock daemon messages
10 Security/authorization messages*
11 FTP daemon messages
12 NTP subsystem messages
13 Log audit messages*
14 Log alert messages*
15 Clock daemon messages †
16 Local use 0 (local0)
17 Local use 0 (local1)
18 Local use 0 (local2)
19 Local use 0 (local3)
20 Local use 0 (local4)
21 Local use 0 (local5)
22 Local use 0 (local6)
23 Local use 0 (local7)
*Various operating systems have been found to utilize Facilities 4, 10, 13, and 14 for security/
authorization, audit, and alert messages that seem to be similar.
†Various operating systems have been found to utilize both Facilities 9 and 15 for clock (cron/at)
messages.
*
†
Issue 4
363-208-050
(Continued on next page)
June 2002 4-147