SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Displaying Statistics for PPP
Entering the PPP
command
Example of PPP
statistics report
Point-to-point protocol (PPP) allows a computer to connect to a remote network or
device over either a synchronous interface or a standard dial-up telephone line
and modem.
To display the statistics for point-to-point protocol (PPP), enter the PPP command
at the statistics prompt. For example:
(statistics)> PPP
The following is an example of a PPP statistics report that will be displayed on the
PC monitor screen.
Link Control Protocol Status = OPENED
Internet Protocol Control Protocol Status = OPENED
This is a status report only; no errors are reported.
Point to Point Protocol
363-208-050
7-21
Issue 4
June 2002