Lucent Technologies SLC ConnectReach User & Service Manual page 98

®
Configuring the SLC ConnectReach
®
Preparing the SLC ConnectReach
Configuration
Initiating a Session with the SLC
ConnectReach System (Continued)
From the CIT at
SLC-2000 RT/HDT
(continued)
4-12
Issue 4 June 2002
™
System
™
System for Initial
Step Procedure
7 At the CIT prompt, enter:
ACCESS-DT::dt-mds#-cu#;
Where: mds# = Metallic distribution shelf number (1 — 8) housing DT
Server
cu# = Channel unit slot number (1, 3, 5, 7, 9, 11, 13, 15, 17,
19, 21, or 23 for 12-line DTs or 1, 5, 9, 13, 17, or 21 for
24-line DTs) of MDS slot housing DT Server.
Example: ACCESS-DT::dt-2-1;
Response: /* Hit return to connect to DT.
Stop! End of Procedure.
To exit type dlc. */
363-208-050