Lucent Technologies SLC ConnectReach User & Service Manual page 512

IP Address Translation for Enterprise
NAT (Continued)
Procedure
(continued)
-XQH 
F-6
Issue 4
Step Procedure
5 To create a second group enter a number for it, and then another set of
Start and End commands. In the example, Group 2 has an in-Start
address of 192.168.5.1 and an in-End address of 192.168.5.254, while
the out-Start address is 213.213.213.1 and out-End address of
213.213.213.1.
Stop! End of Procedure.
Normal operation of Dynamic NAT does not allow incoming IP packets. For the
ENAT example in this Appendix, the NOC needs incoming access to the
Corporate HQ LAN IP address (192.168.0.1) for management purposes. This is
achieved by the use of a PVC, as described in the next section.
363-211-129
Appendix E