Lucent Technologies SLC ConnectReach User & Service Manual page 444

Software Upgrade, Maintenance, and Trouble Clearing
Trouble Clearing Procedures
Preparing the SLC ConnectReach System
for Channel Testing (Continued)
Definition of
diagnose command
options (continued)
9-30 Issue 4 June 2002
Tone1k When set to tone1k mode, the line should emit a
constant 1-kHz tone audible on a connected phone. If
it does, the line should be able to receive calls when
reset to normal mode.
Reversal When set to reversal mode, the polarity of tip and ring
are reversed for the channel. To verify that the line is in
reversal mode, use external test equipment. If the test
equipment indicates that tip and ring are in fact
reversed, the line should be able to receive calls when
reset to normal mode.
363-208-050