Lucent Technologies SLC ConnectReach User & Service Manual page 166

®
Configuring the SLC ConnectReach
Using the Configuration Commands
Configuring Lines (Continued)
BOX features
description
To
Set the distinctive ring option
Set the transfer option
Set the consultation hold option
Set the three-way calling option
Set the call waiting option
Set the forward variable option
Set the forward no answer option fwd-no-answer
Set the forward busy option
Set the number of rings before
forwarding a call
Set the number for call forward
variable
Set the number for call forward no
answer
Set the number for call forward
busy
Set the busy redial option
Enable direct trunk access
Assign a call pickup group
Set the line group to the default
settings
Access online assistance
4-80 Issue 4 June 2002
™
System
This submenu is used to set the Business OfficeXchange (BOX) features and only
appears when the BOX features and the LCR/DID features are installed and the
ClearReach feature is not enabled. The BOX features provided are similar to a
Centrex service offered by a CO switch, but without the need for dedicated lines to
the CO for each extension. The BOX features also provides configurations for
connections to voice mail and paging systems. The following table lists the BOX
feature commands.
Enter this command... ...and one of these options
distinctive-ring off, [on]
transfer off, [on]
consultation-hold off, [on]
three-way-calling off, [on]
call-waiting [off], on
fwd-variable off, [on]
off, [on]
fwd-busy off, [on]
fwd-rings 0..[4]..10
(variable forward
fwd-num-variable number)
(no-answer forward
fwd-num-no-answer number)
fwd-num-busy (busy forward number)
busy-redial off, [on]
direct-trunk-sel [off], on
call-pickup-group
line-group-default
Help
363-208-050
[0]...5
(Continued on next page)