Lucent Technologies SLC ConnectReach User & Service Manual page 420

Software Upgrade, Maintenance, and Trouble Clearing
Maintenance Procedures
Upgrading the SLC
System with New Software (Continued)
Software upgrade
from a remote
computer
(continued)
9-6 Issue 4 June 2002
® ™
ConnectReach
Step Procedure
5 The SLC ConnectReach system asks you to confirm that you want to
perform a warm restart and enter maintenance mode. Enter "y."
6 Dial the modem connected to the SLC ConnectReach system again.
When the SLC ConnectReach system boots in the maintenance mode,
you are prompted for your login name and password. Enter the carrier
login name and password.
7 At the Main Menu prompt, enter the xmodem-download command.
> xmodem-download
The system responds with:
1 meg of ram allocated for preparing flash
followed by: CCCCCC
8 While the CCCCCC string is progressing across the screen, start an
Xmodem transfer of the new software. Be sure to use Xmodem as your
protocol in your terminal application. In Hyperterminal, a Windows
application, select Transfer from the menu bar and select Send File.
When the Send File dialog box appears, select the Xmodem protocol and
enter the path and file name. If binary or American standard code for
information interchange (ASCII) is an option, choose binary.
After the transfer completes, the following message will appear on the
screen and the system will reboot:
Transfer complete.... Saving image
363-208-050
(Continued on next page)