Description Of Indicators - Lucent Technologies SLC ConnectReach User & Service Manual

Product Description
Physical and Functional Description

Description of Indicators

Indicator locations
and designations
STATUS LED
MAINT LED
2-16 Issue 4 June 2002
The following figure shows the positions of the LED indicators on the front panel of
the SLC ConnectReach system apparatus cases. A description of each indicator
follows.
This green LED provides an indication of the status of the self-test and activity on
the T1 line according to the state of the LED. The various states of the STATUS
LED and their indication are as follows:
On — Self-test was successful; no packets are being sent/received on the
3
T1 line.
Flashing —Self-test was successful; data packets are being sent/received
3
on the T1 line.
Off — Self-test failed.
3
This yellow LED provides an indication of a network loopback or active diagnose
command. The various states of the MAINT LED and their indication are as
follows:
On — Network loopback is present on the network T1 line.
3
Flashing — A diagnose command is active.
3
Off — The SLC ConnectReach system is operating normally.
3
363-208-050
(Continued on next page)