Preparing/Accessing The Slc ® Connectreach ™ System; Using A Web Browser; Accessing The Slc Connectreach System Using A Web Browser - Lucent Technologies SLC ConnectReach User & Service Manual

Configure/Monitor and Upgrade Software for the SLC
ConnectReach System Using a Web Browser
Preparing/Accessing the SLC
Accessing the SLC ConnectReach System

Using a Web Browser

Logging in to the
SLC ConnectReach
system
8-4
Issue 4 June 2002
® ™
ConnectReach
Use the following procedure to access and log in to the SLC ConnectReach
system:
Step Procedure
1 Start a Web browser on the computer.
2 In the Web browser, enter the IP address or host name assigned to the
SLC ConnectReach system in the Location/Address box and press the
Return/Enter key. The following figure shows an IP address entered in
the Location text box in the Microsoft Internet Explorer browser.
NOTE: If you are connecting to the SLC ConnectReach system from
the local area network (LAN), the IP address should be the SLC
ConnectReach system's address on the LAN. If you are connecting
to the SLC ConnectReach system from the wide area network (WAN),
the IP address should be the SLC ConnectReach system's address
on the link to the central office (CO).
3 The SLC ConnectReach system prompts you to enter a login name and
password in the User name and Password dialog boxes, as shown in the
following figure.
NOTE: If no login name and password are assigned, leave the Name
and Password dialog box blank, and click OK.
System 363-208-050
(Continued on next page)