Lucent Technologies SLC ConnectReach User & Service Manual page 503

EZ Config
Using EZConfig
Initial Configuration of the SLC
ConnectReach System (Continued)
Procedure
(continued)
Action/Prompt/Response
14. Enter the DLCI
and click the Save
Changes button.
15. EZConfig will save
the configuration
changes to the
NVRAM, restart
the SLC
ConnectReach
system and return
to the main menu.
Restarting the SLC
ConnectReach
system will take a
moment, please
wait a few seconds
before clicking on
another link. To
run voice
diagnostics, click
on the Voice
Diagnostics
button.
Screen Display
363-208-050
(Continued on next page)
Issue 4 June 2002 E-11