Product Description
Physical and Functional Description
General Physical Characteristics
Size
Weight
Operating
temperature/
humidity
Power requirements
Mounting positions
Mounting clearance
2-8
Issue 4
June 2002
The SLC ConnectReach system measures 1.75 inches high, 17 inches wide, and
14 inches deep.
The SLC ConnectReach system weighs approximately 9 lb.
The SLC ConnectReach system can operate within a temperature range of 0 to
50° C (32 to 122° F) at a maximum relative humidity of 95 percent,
noncondensing.
The SLC ConnectReach system is designed to accept input power from either an
AC or DC power source with the following requirements.
AC power
The AC input power required for the SLC ConnectReach system power supply
transformer is 95 to 125 V AC, 60 Hz, and 1.0 amp.
DC power
The DC input power required for the SLC ConnectReach system is 40 to 56 V DC
at 50 VA.
The SLC ConnectReach system can be mounted at either of the following
locations:
19- or 23-inch rack mount
3
Wall mount
3
Desk top mount.
3
The minimum clearance around the SLC ConnectReach system after it is installed
should be as follows:
Above: 1.75 inches
3
Below: 0.0 inch
3
Front: 5.0 inches
3
Rear: 0.6 inch
3
Sides: 2.0 inches.
3
363-208-050