Lucent Technologies SLC ConnectReach User & Service Manual page 497

EZ Config
Using EZConfig
Initial Configuration of the SLC
ConnectReach System (Continued)
Procedure
(continued)
Action/Prompt/Response
2. Select the line
build out required
by the NOC and
click on the Next
button
3. Select the clock
setting. If the clock
is provided by the
network T1
provider, select
network. If the
SLC
ConnectReach
system is to be the
clock source,
select internal.
Click on the Next
button.
Screen Display
363-208-050
(Continued on next page)
Issue 4 June 2002 E-5