Using The Display, Softkeys And Display Control Buttons; Entering Softkey Mode And Viewing The Three Feature Option Screens - Lucent Technologies Voice Terminal 8411 User Manual

Using the Display, Softkeys and Display
If you are using an 8411D voice terminal (which has a display), the following information will
help you use the display, the softkeys, and the display control buttons.
The softkeys are the four keys labeled with arrows (
the display. The four display control buttons, labeled
and Next are located under the softkeys. Figure 4 shows the location of the softkeys in
relation to the display above the softkeys and the display control buttons below them.
Figure 4. The Display, Softkeys, and Display Control Buttons

Entering Softkey Mode and Viewing the Three Feature Option Screens

There are three separate feature option screens. Each of these screens allows you to select from
four different features.
You can enter Softkey Mode by pressing the display option button labeled
is an example of a feature option screen.
The top line of each feature option screen shows you the status of each of the four features. An
arrow appears above the feature name or abbreviation if that feature is active. If there is no arrow
above the feature, the feature is not active. In the above example, the Automatic Callback feature
is active because there is an arrow above that feature abbreviation.
Note: If the feature requires you to dial a telephone number or extension, such as Call
Forwarding, you will temporarily see the digits you are dialing, rather than the arrow, above the
feature name.
Control Buttons
Menu Exit Prev
LWC CnLWC AutCB Timer
) located directly below
Menu , Exit ,
8411D
Display
Softkeys
Next
Display control buttons
Prev ,
Menu . The following
16