Lucent Technologies SLC ConnectReach User & Service Manual page 384

SLC ConnectReach System Monitoring
Miscellaneous Monitoring Commands
Display Current Version of System
Software
Entering the version
command
7-50 Issue 4 June 2002
The version command is used to display the current version of the SLC
ConnectReach system software and uptime information; that is, how long the SLC
ConnectReach system has been running since the last power-on or reboot.
At the Main Menu prompt, enter the version command:
Example:
> version
The following is an example of the display obtained when the version command
is entered.
******* System Image Boot *******
ConnectReach system(3.6.3)
Built: Apr 6 1998, 15:24:47
NVRAM version 0107
PB $Id: romInit.s,v 1.3 1997/03/07 23:44:27 dab Exp $
Copyright 1996-1998 VINA Technologies, Inc.
System running for
The version information can be interpreted as follows:
ConnectReach system (3.6.3)
NVRAM version 0107
PB $Id: romInit.s,v 1.3...
18 day 22 hour 29 mins 13 secs
System image version
Configuration partition version
Protected boot version
363-208-050