Lucent Technologies SLC ConnectReach User & Service Manual page 387

SLC ConnectReach System Monitoring
Miscellaneous Monitoring Commands
Using the Traceroute Command
(Continued)
Entering the
traceroute
command
(continued)
Some routers do not reply with a timeout message. In those instances, an "
be placed in the time field. The ttl is displayed with a number and an
exclamation point (for example, ttl=125! ) when the response packet returns an
unexpected value for the ttl . Refer to the following table for a listing of some of
the possible codes.
Code Comments
!H host unreachable
!N network unreachable
!P protocol unreachable
!S source route failed
!F fragmentation needed
363-208-050
*
" will
Issue 4 June 2002 7-53