Lucent Technologies SLC ConnectReach User & Service Manual page 464

Configuration Examples
Examples of the Different Methods of Configuring the
® ™
SLC ConnectReach System
Quickstart Configuration Example
(Continued)
Example
(continued)
B-6
Issue 4 June 2002
NOTE:
If you change the beginning channel number of the range of data channels
and do a warm-start, the system will automatically prompt you that it will
perform a cold-start.
The next time you connect to the SLC ConnectReach system, you will be
prompted for a login name and password. If you want access to the full set of SLC
ConnectReach system configuration and monitoring commands, log in with the
carrier name and password ("telco" in the previous example).
363-208-050