®
Configuring the SLC
ConnectReach
Using the Configuration Commands
Configuring DS0 Provisioning
(Continued)
Example of
ClearReach
enabling/disabling
4-38
Issue 4
June 2002
™
System
When the ConnectReach command is selected, the display on the terminal
monitor will show a listing of the channel unit assignments, as described
previously, and the status of the ClearReach feature. If it is necessary to change
the status of the ClearReach feature, use the following syntax to make the
appropriate change:
(config:DS0-provisioning:ConnectReach)> clearreach on/off
Example:
(config:DS0-provisioning:ConnectReach)> clearreach off
363-208-050