SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Displaying Statistics for Firewall
Entering the
firewall command
Example of firewall
statistics report
The firewall statistics relate to IP filtering.
To see the number of packets passed or filtered out by the firewall, enter the
firewall command at the statistics prompt. For example:
(statistics)> firewall
The following is an example of a firewall statistics report that will be displayed on
the PC monitor screen.
IN (from WAN to LAN) [currently enabled]
Number of packets passed 75389
Number of packets failed 13
OUT (from LAN to WAN) [Currently enabled]
Number of packets passed 116
Number of packets failed 83
IP Forwarding is enabled
This is a status report only; no errors are reported.
363-208-050
7-17
Issue 4
June 2002