Lucent Technologies SLC ConnectReach User & Service Manual page 385

SLC ConnectReach System Monitoring
Miscellaneous Monitoring Commands
Displaying Hardware Configuration
Entering the show
hardware command
The show hardware command is used to display the current hardware
configuration for the SLC ConnectReach system. This command displays
information such as the unit's serial number, the Ethernet address, the amount of
main memory, and the presence or absence of optional hardware components,
such as the digital signal processor (DSP).
At the Main Menu prompt, enter the show-hardware command:
> show-hardware
Information about the current hardware configuration for the SLC ConnectReach
system is displayed. Abbreviations in the following sample display include: digital
signal processor (DSP), processor version register (PVR), and memory
management unit (MMU).
Hardware configuration:
Hardware version 0006
Serial number 0000000000323
Ethernet address 00.60.49.00.02.8C
Analog channels 1-8 are type FXS
Analog channels 9-16 are type FXO revision A
4194304 bytes of main memory
No SIMM memory present
Secondary T1 is not present
DSP is present
363-208-050
Issue 4 June 2002 7-51