Lucent Technologies SLC ConnectReach User & Service Manual page 86

Preinstallation Planning
Configuration and Installation Process
SLC ConnectReach System Preconfiguration Worksheet (Contd)
22. NTP
23. DNS Proxy Service Enable:
24 QoS
.
25. RS-232 Port
26. SYSLOG
* Duplicate and fill in this numbered item of the worksheet for each set of channels requiring different configuration.
3-16 Issue 4 June 2002
4 On
Enable:
Host name or IP address: ________________
Difference in minutes between local time and Greenwich Mean Time (GMT): ___________
4 On
IP address of primary DNS server: ____________________
IP address of secondary DNS server: ____________________
4 On
Enable:
First QoS Source IP Address
_________________
and/or Destination IP Address
______________
Second QoS Source IP Address
_________________
and/or Destination IP Address
______________
Third QoS Source IP Address
_________________
and/or Destination IP Address
______________
Fourth QoS Source IP Address
_________________
and/or Destination IP Address
______________
Fifth QoS Source IP Address
_________________
and/or Destination IP Address
______________
4 9600 (This is the default and recommended setting.)
Baud rate:
4 19200
4 On 4 Off
IP Address of Host:
sysconf facility 4 (User-level msgs)
4 Off
4 Off
4 Off
4 38400
access facility 4 (Security/Authorization msgs)
Source Netmask
___________________
Destination Netmask
________________
Source Netmask
___________________
Destination Netmask
________________
Source Netmask
___________________
Destination Netmask
________________
Source Netmask
___________________
Destination Netmask
________________
Source Netmask
___________________
Destination Netmask
________________
IP add/name of source:
363-208-050