Lucent Technologies SLC ConnectReach User & Service Manual page 238

®
Configuring the SLC ConnectReach
Using the Configuration Commands
Configuring SYSLOG (Continued)
Sample (continued)
4-152 Issue 4 June 2002
™
System
# Priority/Severity
1. User.Info
2. User.Info
3. Auth.Info
4. Auth.Warning
5. User.Info
6. User.Info
7. User.Info
8. User.Info
9. User.Info
10. Auth.Info
11. Auth.Info
12. Auth.Info
13. Auth.Info
14. User.Info
15. User.Info
16. User.Info
17. User.Info
18. Auth.Warning
Log Message
Jan 11 12:22:14 192.168.11.2 conf:
Command 'syslog 192.168.1.163
Jan 11 12:22:22 192.168.11.2 conf:
Command 'exit'
Jan 11 12:22:27 192.168.11.2 auth:
Failed login for on 10
Jan 11 12:22:36 192.168.11.2 auth:
Telnet logged on as Carrier
Jan 11 12:23:40 192.168.11.2 conf:
Command 'config'
Jan 11 12:23:48 192.168.11.2 conf:
Command 'NTP'
Jan 11 12:24:02 192.168.11.2 conf: Set
enable to on
Jan 11 12:24:29 192.168.11.2 conf:
Command 'exit'
Jan 11 12:24:39 192.168.11.2 conf:
Command 'exit'
Jan 11 12:24:51 192.168.11.2 auth: HTTP
Connection from 192.168.1.163
refused...shell in use
Jan 11 12:24:58 192.168.11.2 auth: Tel-
net session overridden by HTML session
Jan 11 12:24:58 192.168.11.2 auth: Tel-
net session killed by console, HTTP, or
FDL user
Jan 11 12:25:02 192.168.11.2 auth:
192.168.1.163 started HTML session
Jan 11 12:25:28 192.168.11.2 conf: HTTP
Command '/config/NTP'
Jan 11 12:25:28 192.168.11.2 conf: Set
enable to on
Jan 11 12:25:28 192.168.11.2 conf: Set
server to clock.psu.edu
Jan 11 12:25:28 192.168.11.2 conf: Set
minutes-from-GMT to 0
Jan 11 12:36:14 192.168.11.2 auth:
192.168.1.163 logged on as Carrier
363-208-050