®
Configuring the SLC
ConnectReach
Using the Configuration Commands
Configuring Voice Mail (Continued)
Key commands (continued)
Procedure
™
System
MWI-off-prefix
Load-profile
After you have verified the required configuration, follow these steps to configure
Voice Mail:
Step
Procedure
1
At the Config prompt, enter the voice-mail command:
(config)> voice-mail
The prompt changes to the Config:Voice-mail prompt.
(config:Voice-Mail)>
This command specifies the DTMF string to attach to
the user's extension indicating no messages are
waiting. The information is coming from the voice mail
system to the SLC ConnectReach system.
This submenu allows the option of selecting one of five
preset configurations for the most common voice mail
system profiles.
The profiles included are:
•
Generic
•
BBS Telecom
•
Panasonic TD1232
•
Toshiba Dk280
•
Samsung DCS.
363-208-050
(Continued on next page)
Issue 4
June 2002
4-99