SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Displaying Statistics for ARP
Entering the ARP
command
7-10
Issue 4
June 2002
Address Resolution Protocol (ARP) is a TCP/IP protocol used to convert IP
addresses to physical addresses, such as Ethernet (MAC) addresses for
devices. At the statistics prompt, enter the arp-table-info command to
display the ARP table of IP to MAC address mappings. The results will
appear as follows (the name of the device for the IP address may also be
shown):
192.168.0.1 at 0:60:49:00:02:87
192.168.0.2 at 0:b0:d0:a5:c8:19
363-208-050