SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Displaying Statistics for IP
Entering the IP
command
Example of IP
statistics report
IP, or Internet Protocol, is the network layer protocol in the TCP/IP protocol stack.
IP specifies the format and addressing scheme of packets. It does not establish a
connection between the sender and receiver of these packets, however. TCP and
UDP carry out the connection-making function.
To display the statistics for IP, enter the IP command at the statistics prompt. For
example:
(statistics)>
ip
The following is an example of an IP statistics report that will be displayed on the
PC monitor screen.
total
794
badsum
0
tooshort
0
toosmall
0
badhlen
0
badlen
0
fragments
0
fragdropped
0
fragtimeout
0
forward
0
cantforward
11
redirectsent
0
fastpath
0
363-208-050
(Continued on next page)
7-7
Issue 4
June 2002