SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Displaying Statistics for ICMP
Entering the ICMP
command
Example of ICMP
statistics report
Internet control message protocol (ICMP) is a low-level protocol that supports
functions such as echo requests (such as Ping), and displays messages such as
Host not available or Network unreachable .
To display the statistics for ICMP, enter the ICMP command at the statistics
prompt. For example:
(statistics)> ICMP
The following is an example of an ICMP statistics report that will be displayed on
the PC monitor screen.
ICMP:
2
call to icmp_error
0
error not generated because old message was icmp
Output histogram:
echo reply: 1
0
message with bad code fields
0
message < minimum length
0
bad checksum
0
message response generated
Input histogram:
echo reply: 12
destination unreachable: 6
0
message response generated
363-208-050
7-11
Issue 4
June 2002