Lucent Technologies SLC ConnectReach User & Service Manual page 402

Configure/Monitor and Upgrade Software for the SLC
ConnectReach System Using a Web Browser
Executing Commands from the Main Menu
Displaying Selected Menu Screens
(Continued)
Display logs of
events and errors
(continued)
8-14
Issue 4 June 2002
To Display a Log Screen and Set Parameters
Step Procedure
1 In the SLC ConnectReach system Main Menu screen, click the log
command and the Log screen appears. Refer to the following figure for a
sample of the Log screen that appears.
2 In the Log screen, next to either the Eventdump , T1dump, or
Accessdump option, enter the maximum number of log event records
you want to display.
3 Click the Run button next to the option.
Stop! End of Procedure.
363-208-050
(Continued on next page)