Displaying Statistics For Udp - Lucent Technologies SLC ConnectReach User & Service Manual

SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status

Displaying Statistics for UDP

Entering the UDP
command
Example of UDP
statistics report
7-14
Issue 4 June 2002
User datagram protocol (UDP) is a simple, datagram (packet)-oriented transport
layer protocol, used by SNMP.
To display the statistics for user datagram protocol (UDP), enter the UDP
command at the statistics prompt. For example:
(statistics)> udp
The following is an example of a UDP statistics report that will be displayed on the
PC monitor screen.
UDP:
81 total packets
44 input packets
37 output packets
0 incomplete header
0 bad data length field
0 bad checksum
16 broadcasts received with no ports
0 full socket
363-208-050