Lucent Technologies SLC ConnectReach User & Service Manual page 281

Installation
®
Mount the SLC ConnectReach
Wall Mounting (Continued)
Wall mount using
hinged wall mount
assembly
(continued)
™
System
Step Procedure
5 NOTE: In a multiple mount arrangement, extension brackets are used to
attach a unit being installed in a hinged wall mount assembly to the unit that
was installed last (for example, the second unit is attached to the first unit,
the third unit is attached to the second unit, etc.).
Using the screws and washers provided in the extension bracket kit,
loosely attach two of the extension brackets to the top and two to the
bottom of the last SLC ConnectReach system unit that was mounted in
the hinged wall mount assembly (refer to the following figure).
363-208-050
(Continued on next page)
Issue 4 June 2002 5-29