Lucent Technologies SLC ConnectReach User & Service Manual page 475

Configuration Examples
Examples of the Different Methods of Configuring the
® ™
SLC ConnectReach System
LCR/DID Configuration Example
(Continued)
Dialing table default
entries (continued)
Detect-table row 2 routes United States long distance calls to output-row 1, which,
in turn, routes them to trunk group 1 with an alternate route to trunk group 2
(output-row 3).
Detect-table row 3 routes international calls to output-row 2, which, in turn, routes
them to trunk group 1 with an alternate route to trunk group 2 (output-row 3).
Detect-table row 4 routes local calls, including information, service repair, and
emergency calls, to output-row 3, which, in turn, routes them to trunk group 2.
Detect-table row 5 routes credit card calls to output-row 3, which, in turn, routes
them to trunk group 2.
The default for all other calls is output-row 3, which, in turn, routes them to trunk
group 2.
363-208-050
B-17
Issue 4 June 2002