Lucent Technologies SLC ConnectReach User & Service Manual page 340

SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Entering the Statistics Mode (Continued)
Entering the
statistics command
options
7-6
Issue 4 June 2002
.
To ...
*
Display statistics for IP
Display statistics for QOS
Display statistics for QOS
Display statistics for ARP
Display statistics for ICMP
*
Display statistics for TCP
Display statistics for UDP
Display statistics for the interfaces
Display statistics for Firewall
Display statistics for NAT
Display statistics for DHCP
Display statistics for PPP
Display statistics for the T1 Interface
Display statistics for voice channels
Display statistics for the frame relay interface
Display the lower protocol layer statistics for the WAN Frame
Relay Interface
Display statistics for a specific Frame Relay pvc or all pvcs
Display statistics for supported IP protocols
Display statistics for routing
Display statistics for the AnyMedia ConnectReach Terminal
Access on-line assistance
Exit the Statistics submenu and return to the Main prompt
* IP, ICMP, TCP, and UDP statistics reports are intended for advanced users who are familiar with
Ethernet networks.
*
*
363-208-050
Enter this command
ip
Qos
qos
arp-table-info
icmp
tcp
udp
interfaces
Firewall
NAT
DHCP
PPP
T1
voice-states
frame
show-frinterface
show-pvc
show-ipsummary
routes
ConnectReach
Help
exit