Lucent Technologies SLC ConnectReach User & Service Manual page 377

SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Display Field
InDelivers
ReassemblyTimeout
ReassemblyReqds
ReassemblyFails
InMsgs
InErrors
InDestUnreachs
InTimeExcds
inRedirects
inEchos
InEchoReps
InTimestamps
OutMsgs
Corresponding MIB Field
ipInDelivers
ipReasmTimeout
ipReasmReqds
ipReasmFails
icmpGroup
icmpInMsgs
icmpInErrors
icmpInDestUnreachs
icmpInTimeExcds
icmpinRedirects
icmpinEchos
icmpInEchoReps
icmpInTimestamps
icmpOutMsgs
Description
The total number of input packets successfully
delivered to IP user-protocols (including
ICMP).
The maximum number of seconds which
received fragments are held while they are
awaiting reassembly at this device.
The number of IP fragments received that
needed to be reassembled at this device.
The number of failures detected by the IP
reassembly algorithm (for whatever reason:
timed out, errors, etc).
Note that this is not necessarily a count of
discarded IP fragments, since some algorithms
(notably the algorithm in RFC 815) can lose
track of the number of fragments by combining
them as they are received.
The number of ICMP messages which the
device received. Note that this counter includes
all those counted by icmpInErrors.
The number of ICMP messages which the
device received but determined as having
ICMP-specific errors (bad ICMP checksums,
bad length, etc).
The number of ICMP Destination Unreachable
messages received.
The number of ICMP Time Exceeded
messages received.
The number of ICMP Redirect messages
received.
The number of ICMP Echo (request) messages
received.
The number of ICMP Echo Reply messages
received.
The number of ICMP Timestamp (request)
messages received.
The number of ICMP messages which this
device attempted to send. Note that this
counter includes all those counted by
icmpOutErrors.
Issue 4
363-208-050
7-43
June 2002