Lucent Technologies SLC ConnectReach User & Service Manual page 410

Configure/Monitor and Upgrade Software for the SLC
ConnectReach System Using a Web Browser
Executing Commands from the Main Menu
Using a Web Browser to Upgrade
Software (Continued)
Downloading a
software upgrade to
a PC (continued)
8-22
Issue 4 June 2002
Step Procedure
1 Set the address location of your browser to:
ftp://lucentftp: connectreach@www2.vina-tech.com/connectreach/.
Press the Enter/Return key.
2
NOTE:
The software is stored in a file named vina.st_rom.xxx, where the
suffix xxx is the version string (for example, 305 is Software
Release 3.05). Since the FTP server may be case sensitive, enter
all alphabetic characters exactly as they appear in the file suffix.
From the list of files appearing on the screen, click on the desired version
of SLC ConnectReach system software
NOTE:
It is important to specify the correct version number. If a version
older than the one presently running on the SLC ConnectReach
system is accidentally specified, the download will still take place
and the old software will overwrite the new software.
3 Save the appropriate software file to a location on your PC.
Since some Web browsers may replace the first period in the software
file name with an underscore, verify that the software file name matches
the file name in the directory listing shown under /ConnectReach. If the
two file names do not match exactly, the network upgrade will not work
properly.
Stop! End of Procedure.
363-208-050