Lucent Technologies SLC ConnectReach User & Service Manual page 187

®
Configuring the SLC ConnectReach
Using the Configuration Commands
Configuring Voice Mail (Continued)
Procedure
(continued)
™
System
Step Procedure
3 To select one of the preconfigured voice mail settings, enter the load-
profile command.
(config:Voice-Mail)> Load-Profile
The prompt changes to the Config:Voice-mail:Load-Profile prompt.
(config:Voice-Mail:Load-Profile)>
The following table describes the load-profile commands.
To
Select a profile number profile-number
List the profiles
available
Show the settings of
the profile number
selected
Copy the selected
profile to the voice mail
menu
Access online
assistance
4 When you have made the necessary configuration changes, you can
return to the Config menu by typing exit or an exclamation point (!)
(quoted as "\ |" through the SLC-2000 Access System CIT)
NOTE: The new command values take effect as soon as you save the
configuration. You do not need to reboot the SLC ConnectReach
system to use the new values.
Stop! End of Procedure.
Enter this command...
list-profiles
show-selected-
profile
copy-selected-
profile
Help
...and one of these options
[1]...5
.
Issue 4 June 2002 4-101
363-208-050