Lucent Technologies SLC ConnectReach User & Service Manual page 278

Installation
®
Mount the SLC ConnectReach
Wall Mount (Continued)
Wall mount using
stationary
mounting brackets
(continued)
5-26 Issue 4 June 2002
™
System
Step Procedure
1 Attach the short side of the brackets to the SLC ConnectReach system.
2 Determine the location and position the unit on the wall.
3
NOTE:
Wall mount screws are not provided as part of the installation kit.
CAUTION:
Moly screws or anchor bolts are required when installing the SLC
ConnectReach system on wallboard or sheetrock walls.
Secure the unit to the wall using the required fasteners.
363-208-050
(Continued on next page)