Lucent Technologies SLC ConnectReach User & Service Manual page 505

EZ Config
Using EZConfig
Initial Configuration of the SLC
ConnectReach System (Continued)
Procedure
(continued)
Action/Prompt/Response
18. The diagnostics
information will be
displayed. To
continue with
another line
number or
diagnostic type,
use the Back
button or arrow on
your browser.
19. To set the SLC
ConnectReach
system to the
factory default
settings, click on
Set Default
Configuration.
This screen will
appear.
WARNING:
Setting the SLC
ConnectReach
system to the
factory default
settings will erase
all previous
changes.
Screen Display
363-208-050
(Continued on next page)
Issue 4 June 2002 E-13