Lucent Technologies SLC ConnectReach User & Service Manual page 333

®
Provisioning the SLC -2000 RT/HDT
T1 Cross-Connections
Establishing T1 Cross-Connections from
the CIT (Continued)
Entering
ENT-CRS-T1
command
(continued)
Step Procedure
5 Using the CIT, enter the following command:
ENT-CRS-T1:: Address1 , Address2
Where:
Address1 = physical feeder access identifier (AID) (for example,
a-1&&2-all )
Address2 = VRT feeder or logical INA AID [for example,
v3fdr-1-1&&8 (VRT feeder) or ina-17&&28 (INA
feeder)]
NOTE:
The command ENT-CRS-T1::a-all,v3fdr-1-all will
cross-connect all 28 physical DS1s to all 28 logical DS1s on the
TR-303 VRT. Refer to document 363-208-003, SLC -2000 Access
System, Commands and Messages, for other cross-connection
configurations and CIT commands.
Stop! End of Procedure.
363-208-050
Issue 4 June 2002 6-25