Configure/Monitor and Upgrade Software for the SLC
ConnectReach System Using a Web Browser
Executing Commands from the Main Menu
Displaying Selected Menu Screens
(Continued)
Display logs of
events and errors
(continued)
To Clear the Log
Step
Procedure
1
In the text box next to the Clear option, enter one of the parameters
listed in the following table.
To Clear ...
The event log
The T1 line log
All logs
2
Click the Run button next to the Clear option.
Stop! End of Procedure.
To Stop, Start, or View Status of the Log
To stop the log from running, click the stop command in the Log screen.
3
To start the log, click the continue command in the Log screen.
3
To display the status of the log, click the status command in the Log
3
screen.
...Enter this option
event
t1
all
Issue 4
363-208-050
8-15
June 2002