Lucent Technologies SLC ConnectReach User & Service Manual page 375

SLC ConnectReach System Monitoring
Using the Statistics Command to Display System
Elements Status
Displaying Statistics for IP Protocols
introduction At the statistics prompt, enter the show-ipsummary command to see statistics
for the various IP protocols in use on the SLC ConnectReach system:
(statistics)>
A report of the current pvc statistics similar to the following example is displayed:
Ip Statistics
IpForwarding: Enabled DefaultTTL: 0
InReceives: 0 InHdrErrors: 0 InAddrErrors: 0
ForwDatagrams: 0 InDelivers: 0
Fragment Statistics
ReassemblyTimeout: 0 ReassemblyReqds: 0
ReassemblymFails: 0
ICMP Statistics
InMsgs: 0 InErrors: 0 InDestUnreachs: 0 InTimeExcds: 0
InRedirects: 0 InEchos: 0 InEchoReps: 0
OutMsgs: 0 OutErrors: 0 OutDestUnreachs: 0
OutRedirects: 0 OutEchoReps: 0
UDP Statistics
RxPackets: 2864479 TxPackets: 133209 NoPorts: 2823631
TCP Statistics
TxTotalPackets: 29 TxDataPackets: 12 TxDataOctets:
RexmitPackets: 0 RexmitOctets: 0
RxTotalPackets: 29 RxDataPackets: 6 RxDataOctets:
RtoAlgorithm: 4 RtoMin: 1000 RtoMax: 64000
ActiveOpens: 0 PassiveOpens: 6 AttemptFails: 0
EstabResets: 0 CurrEstab: 1
show-ipsummary
OutTimeExcds: 0
3603
2632
363-208-050
(Continued on next page)
7-41
Issue 4 June 2002