Lucent Technologies SLC ConnectReach User & Service Manual page 431

Software Upgrade, Maintenance, and Trouble Clearing
Maintenance Procedures
Using the Archive Command to Upload/
Download Configuration Settings
(Continued)
Uploading the
current
configuration using
a modem
(continued)
Step Procedure
4 Start a text capture in HyperTerminal by selecting Transfer, Capture Text,
and entering a meaningful file name with a .TXT extension (for example,
Lucent34.TXT) and then select Start.
NOTE:
When using Windows HyperTerminal, make sure the file name
specified is unique. If the same file name is used more than once,
the information is appended to the existing file. This creates a
problem when it becomes time to do a tty download.
5 At the Archive prompt, enter the tty-upload command.
(archive)> tty-upload
6 When the Archive prompt returns, stop the text capture by selecting
Transfer, Capture Text, and Stop. This will close the text file.
7 To return to the Main Menu, enter the exit command twice.
(Archive:tty-upload)> exit
(Archive)> exit
Stop! End of Procedure.
363-208-050
(Continued on next page)
Issue 4 June 2002 9-17